Self Adhesive Fasteners,uesd In HVAC Systems For Fixing Externtal Thermal Insulation And Internal Acoustics Liner Onto The Duct Surface.

Materials:Low Carbon Steel-PIN/PlateMechanical PropertiesLow Carbon Steel-PlateAlso available by special order in all Stainless Steel or all AluminumPlatingGalvanized coating is standard.-Pin/PlateWashersSelf-locking washers are available in a variety of sizes,shapes,and materialsSize-D12 GA(0.105")is standard.Other sizes available by special order only.Length-L1",1-5/8",2",2-1/2",3-1/2",4-1/2",5-1/2".6-1/2",8"and 9"are standard.Other lengths available by special order.Recommended assembly method:1.Work surfaces should be clean and dry,free of dust,grease,oil and any other loose matter.2.Remove the protective release paper taking care not to touch the adhesive.3.Place the hanger in the required position and press the base against the surface to be insulated4.Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of adherence is achieved after 24 hours